12 Basic Components of a Building Structure – theconstructor.org
The basic components of a building structure are the foundation, floors, walls, beams, columns, roof, stair, etc. These elements serve the purpose of supporting, enclosing and protecting the buildi…
8 Types of Structures in Civil Engineering – theconstructor.org
What are the types of frame structures? The two types of framed structures are: 1. Rigid Frame Structure On-site construction takes place for these frames.
Earthing: Procedure, Types, and Advantages – theconstructor.org
Earthing is the instantaneous discharge of electrical energy by passing charges directly to the earth using a low-resistance cable. Different types of the earth are used to link the metallic parts …
Foundation Construction [PDF]: Depth, Width, Layout, and …
Procedure for construction of foundation starts with a decision on its depth, width, and marking layout for excavation and centerline of foundation. Foundation is the part of the structure below the plinth level in direct contact of soil ...
Standard Specifications of Hollow and Solid Concrete Blocks
1. General Specifications. Hollow and solid concrete blocks shall be sound and free from cracks, broken edges, honeycombing, and other defects that would interfere with the proper placing of block or impair the strength or performance during construction.
What is Rebar? Types and Grades of Steel Reinforcement
What is Rebar? Steel reinforcement bars or rebars are used to improve the tensile strength of the concrete, since concrete is very weak in tension, but is strong in compression. Steel is only used as rebar because elongation of steel due ...
Types of Foundation for Buildings and their Uses [PDF] - The …
The use of mat foundation is for columns and walls foundations where the loads from the structure on columns and walls are very high. This is used to prevent differential settlement of individual footings, thus designed as a single mat (or combined footing) of …
Tips and Rules for Design of Reinforced Concrete Columns - The …
The design of reinforced concrete (RC) column is carried out by following certain procedures. However, some specific rules and requirements need to be met. The conditions are commonly related to reinforcement ratio, size of rebars, spacing of steel ...
7 Major Stages in Water Treatment Plant – theconstructor.org
Water treatment is the process of removing all those substances, whether biological, chemical, or physical, that are potentially harmful to the water supply for human and domestic use. This treatment helps to produce water that is safe, palatable, clear, ...
Everything You Should Know About Cantilever Beams
A cantilever beam is a rigid structural element supported at one end and free at the other, as shown in Figure-1. The cantilever beam can be either made of concrete or steel whose one end is cast o…