I need to replace the end cap on a PVC pipe. The current cap is just a standard PVC cap that I can find at Home Depot for 50 cents. However, none of them have 1/4" threaded holes. I am not ...

If you’ve used PVC as a building ... caps for aesthetics, and end caps designed to receive casters. We also enjoyed seeing the T connector that slides onto a pipe and can function as a swivel.

Build cheap storage cylinders from PVC pipe, end caps, female adapters and cleanout plugs. Parts are available in an assortment of diameters at any hardware store or home center. Cut the pipe to ...

4-inch PVC end cap. 4-inch PVC fitting adapter. 4-inch PVC coupling pipe. 4-inch x 24-inch PVC pipe. This is the combustion chamber. 4-inch to 2-inch PVC reducer. 2-inch x 48-inch PVC pipe.

The electrodes are made from PVC end caps, sanded down flat at the tip ... These caps are placed onto small sections of PVC pipe, which in turn connect to a four-way PVC cross connector.

Cut or drill a larger, 1¾-inch hole in the other 2-inch cap; this will be your piston guide. Glue: Assemble the piston by applying PVC glue [7] to one end of the 2-inch pipe you sawed off in step ...

Acquire an empty 5-gallon drywall bucket, 1- and 4-inch-diameter PVC pipe, a 4-inch flat PVC end cap, pipe fittings to reduce the 4-inch diameter down to 1 inch, a 1-inch tee fitting, PVC solvent ...

a few feet of 1½-inch-diameter PVC pipe and smooth PVC couplings and pipe end caps. Start by boring paths for the pipes to run through the box top. Drill four 115⁄16 holes in a 15 x 15–inch ...