The paper, entitled ”Dual-Wavelength Vat Photopolymerization With Dissolvable, Recyclable Support Structures”, shows a method ...

The TA Instruments RS-DSC offers a more convenient and accurate solution to assess biological drug stability and quality by employing disposable, low sample volume microfluidic chips (MFCs) that ...

Before analysis by DSC, epoxy samples were initially cured at a temperature of 135°C or 180°C to harden the epoxy. However, the NND epoxide proved too reactive to begin the multi-hour cure at 180°C.

A DSC Q2000 (TA, New Castle, USA) instrument with aluminum sample pan was used with an nitrogen (N2) atmosphere with a heating rate of 100°C/min. The pumice powder filled walnut shell/ epoxy ...

system is studied by differential scanning calorimetry, and samples with different curing degrees are prepared by regulating the curing temperature and time. The evolution of microstructure during ...

This makes sure that as soon as the isothermal goal temperature is reached, the sample and instrument can equilibrate ... and reaction order, n. The DSC data obtained on the epoxy resin using heating ...

Samples containing AP were produced according to the ... Table S4 shows the glass transition temperatures (T g) measured by DSC analysis for pristine epoxy resin and all of the epoxy composites. No ...

When first mixed, our epoxy ... Differential scanning calorimetry was also performed. No differences were observed in the results. The effect that microwave heating had on each component (BADGE, PA ...

The epoxy samples were prepared using different percentages by weight of acetone: 0, 2, 5 and 10 wt.%. From DSC and DMA tests, followed by the Borchardt-Daniels kinetic analysis it was reported that ...