Plastic anchors should be used for Sheetrock application only, even though package details claim they can be used in brick or block applications; masonry does not allow the anchors to spread properly.

All you have to do is pre-drill holes through the anchor points and install concrete bolts with masonry anchors into ... since these only come with a plastic floor, denying you exterior anchor ...

Masonry anchors for screws require slightly larger ... These don’t require a plastic or metal sleeve; they screw right into concrete, brick or mortar once there are correctly sized pilot holes.

Bore on your marks using a hammer drill and a carbide-tip masonry bit sized to suit the plastic screw anchors. Make the hole slightly deeper than the anchor's length. Before tapping the anchor ...

It's different from a wood or metal bit because it has a carbide tip. A hole for a masonry anchor should be exactly the same diameter and often the same depth as the anchor for it to work properly ...

Masonry anchors for screws require slightly larger bores than the existing holes. How should I deal with this? If the holes in your wall are a little too narrow, use a carbide bit in a power drill ...