Also note that the output voltage here is not actually doubled even though the circuit appears to be identical to the doubler circuit. This circuit was hay wired to prove that it functions as expected ...

A voltage multiplier is a specialized type of rectifier circuit that converts ... Theoretically the output of the multiplier is an integer times the AC peak input voltage, and while they can ...

For high-current, low-voltage applications, the current doubler makes control-driven synchronous rectification simpler because each output rectifier is referenced directly to secondary ground.

The 110V/220V AC selector mechanism used a clever old trick, a voltage doubler ... the same DC output voltage, whether the AC input is 110V or 220V. Note at this point that the NTC thermistor (TH1) ...

Because there's zero voltage across the transformer ... bridge PWM controller to drive the synchronous rectifiers of a current doubler output stage. While this technique can be applied to any ...

The largest output on the transformer was two 24 V outputs. Combining those outputs gets [Limpkin] to 48V AC, or 68V peak to peak. A full wave voltage doubler with two caps and two diodes gives ...

This is advantageous when the design requires several external ICs which operate from a higher voltage than the nominal input supply. The converter has a typical efficiency of 79% at a low output ...

As well as detecting the mains zero crossing waveform, certain versions offer a buffered dc output ... bridge rectifier inputs, ‘xx1’ variants (BM1Z101FJ, for example) will also work with ac-dc power ...