So my question is really, what's the best quality cable TV amplifier (suitable for use with Digital Cable) that will provide 15-20dB of gain that I could install in the service box outside?

Bandwidth 54-550 MHz, 115 VAC, 60Hz, 4W Gain 30 dB, Noise Figure 5 dB , Cross Modulation -57 dB Maximum Output 45 dBmV for 54 channels DIMENSIONS 8" (W) x 4.50" (H) x 2.75" (D) Test Ports -20 dB ...

This cable tv amplifier circuit is a rf amplifier designed to be quickly installed between two coaxial cables. Both input and output impedances are compatible with 75 Ω cables. The main amplifier si ...

Qorvo’s QPA3311 and QPA3316 hybrid power doubler amplifiers are optimized for DOCSIS 4.0 downstream operations up to 1.8 GHz.

The RFPP2870 SOT115J push-pull amplifier features 28-dB minimum gain at 1003 MHz. The part employs GaN HEMT, GaAs MESFET, and GaAs pHEMT die and operates from 40MHz to 1003MHz. Other features ...

Designed for use as input stages and drivers in distribution amplifiers and optical nodes, the MC-7831/7832/7833 GaAs, CATV hybrid push-pull amplifiers promise high gain, low distortion ...

With two 1:1.33 baluns, the LTC6430-15 can be used as a high fidelity 75Ohm CATV amplifier. P1dB is typically 24dBm. The LTC6430-15 is available in a 4 x 4mm QFN-24 package with exposed pad for best ...

"While GaAs will still figure prominently, the performance advantages of GaN will make this the fastest growing technology for the amplifier building blocks." The CATV infrastructure amplifier ...

Immediately after placing the amp in my system a very noticeable 60Hz hum starting pouring from my speakers. If this has happened to you the chances are it's a ground loop between your Cable TV and ...